Torque Solution V2 HD Oil Pan Street 2002-2014 WRX / 2004-2021 STI / 2004-2013 Forester XT / 2005-2009 Outback XT / 2005-2009 Legacy GT Secure Checkout

Description

The Torque Solution V2 HD Oil Pan is engineered to keep your EJ engine properly lubricated under demanding conditions. Constructed from cast aluminum and CNC-machined for precision, this heavy-duty oil pan increases capacity to approximately 6 quarts, providing added protection for high-performance and track-driven vehicles.

A CNC-machined sealing groove paired with an FKM rubber o-ring gasket delivers a leak-proof seal while eliminating the hassle of scraping gasket material during installation or future servicing. Integrated cooling fins on the bottom of the pan are strategically positioned to promote airflow, helping reduce oil temperatures during aggressive driving.

The updated V2 design features a bolt-in baffle that is integrated into the pan to minimize oil slosh and keep oil at the pickup where it’s needed most. All required installation hardware is included, making this a complete, bolt-on solution with no additional parts required.

Features:

• CNC-machined cast aluminum construction
• 6-quart oil capacity (over 30% increase)
• TIG-welded stainless steel bolt-in internal baffle
• FKM rubber O-ring gasket for leak-free installation
• Integrated CNC cooling fins to lower oil temperatures
• M20 (OEM) and 1/2″ NPT ports for versatility
• Complete stainless steel installation hardware included

Notes:

• Must use with an aftermarket oil pick up.
• Will not work with the OEM or Moroso Oil Pick Ups.
• 2002-2005 WRX EJ20 engines must use an EJ25 Dipstick Part # 11140AA150
  
• Tested to fit with most headers. Confirmed fitment with ETS and Killer B header. Perrin header needs a little work to fit, such as compressing the primary upper tube slightly down towards the lower tube.

Included:

• (1) Cast Aluminum Oil Pan
  
• (1) Bolt-In Stainless Steel Street Baffle (pre-installed)
  
• (4) M6 x 15 Stainless Button Head Bolt (pre-installed w/ baffle)
  
• (1) Seamless FKM Rubber Oil Pan O-Ring Gasket
  
• (2) FKM Rubber Dipstick Tube 2x10mm O-Ring Gaskets
  
• (1) M20 OEM Subaru Drain Plug P/N: 807020010
  
• (5) M20 Copper Drain Plug Gaskets
  
• 1/2″ NPT Brass Plug w/ Teflon Tape (used if not using a temp sensor)
  
• 1/2″ NPT to 1/8″ NPT Brass Plug w/ Teflon Tape (optional for oil temp sensor)
  
• (1) Billet Aluminum Oil Pick Up Suction Tube Spacer w/ x2 -117 FKM O-Ring Gasket
  
• (2) Billet Aluminum Oil Pick Up Pedestal Spacers
  
• (4) FKM Rubber Spacer Bolt Retainer -008 O-Ring Gaskets (used to pre-install the spacers onto the oil pick-up)
  
• (4) M6 Stainless Steel Flat Washer (for oil pick up spacer bolts)
  
• (6) M6 x 30 Stainless Steel Socket Cap Bolt (x4 back outside oil pan bolts, x2 oil pickup tube)
• (10) M6 x 20 Stainless Steel Socket Cap Bolt (front/sides outside oil pan bolts)
  
• (2) M6 x 25 Stainless Steel Socket Cap Bolt (oil pickup tube leg spacers)