Best Seller FDF Race Shop Mega Mantis Angle Kit For Use w/ Subaru Wheel Bearing 2008-2014 WRX / 2008-2014 Impreza

Description

The Subaru Impreza 2008-2014 Mantis Angle Kit is engineered for optimal handling performance while drifting. It features fully fabricated knuckles and arms constructed from high-strength alloy using a tab-and-slot design, ensuring robust welds and connections among all components. Additionally, the kit is designed to be on-car adjustable, allowing all adjustments for caster, camber, and toe to be made without removing any parts.

Key Features:

• Angle: 70 degrees depending on your wheel setup and length of control arms.
• Tie-rods: Outer tie-rods included, these fasten to the stock inner tie-rods.
• Ackermann: Adjustable Ackermann options from Positive – zero – negative.
• Roll Center: Optimized handling by adding 45mm of roll center correction.
• Bump steer: Perfected bump steer for drifting.
• Caster: Modifications made to the displaced caster amount giving a good self-steer feel for the driver and maximizing the performance for drifting.
• Camber: Optimized camber ranging from -3 to -6.
• Track Width: 25-75mm wider per side creating a stable and high clearance front end.
• Suspension Travel: Long travel range, full lock to full lock at any point throughout suspension travel for increased grip.
• Joints: Chromoly Heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable.
• Durable, Reliable & Lightweight: Made from High strength alloy steel and Aluminum.
• FDF Green Powder Coat Finish

Fitment Notes:

• ABS sensors cannot be used on this kit, and ABS is not recommended for drifting.
• A FRS/BRZ wheel bearing must be used, or you must cut the axle stubs and leave them installed in the OEM AWD bearing
• Wheel Bearing not included.

FDF: MIni, Mild, Mega – Whats the Difference?